Makita
Makita 5903R 110V 235mm Circular Saw
£236.25 Exc. VATThe Makita 5903R is a 110V circular saw with a 235mm blade. It features a 1550 watt motor, a no load speed of 4,500rpm and a depth of cut of 85mm. You will need this type of saw when you want a mains-powered tool for straight cutting work, and it also features a rip fence.
Makita 7104L 110V Chain Mortiser
£1,417.50 Exc. VATThe Makita 7104L 110V is a chain mortiser designed for cutting mortises in timber. It has a 1140W motor, single-speed operation, and a maximum mortise depth of 155mm. You will need this type of tool when producing clean, repeatable mortises for joinery and woodworking tasks.
Makita 7104L 240V 1140W Chain Mortiser
£1,417.50 Exc. VATThe Makita 7104L is a 240V chain mortiser with a 1140W motor and single-speed operation. It is designed for cutting mortises, with a stated mortise depth of 155mm. You will need this type of tool when carrying out timber jointing work that requires clean, consistent mortise cuts.
Makita 743053-3 165mm Velcro Backing Disc
£15.94 Exc. VATThe Makita 743053-3 is a 165mm Velcro backing disc. It is designed as a backing disc accessory for use with the listed Makita models. Before ordering, you should check that your tool is PV7000C, 9227CB or 9237CB.
Makita 743081-8 125mm Backing Pad
£25.00 Exc. VATThe Makita 743081-8 is a 125mm backing pad for sanding applications. It features an 8 / 8 hole pattern and is intended for use with BO5030, BO5031, BO5041, DBO180, BO5010, BO5012 and BO5021 models. Before ordering, check the pad diameter and listed model fitment to make sure it matches your tool.
Makita 763196-5 13mm Keyless Chuck
£26.57 Exc. VATThe Makita 763196-5 is a 13mm keyless chuck designed as a replacement chuck. It features a 1/2 x 20UNF chuck mount for matching applications. Before ordering, check the chuck size and mount specification to ensure it suits your drill or existing setup.
Makita 763430-3 S13 Chuck Key
£4.34 Exc. VATThe Makita 763430-3 is an S13 chuck key for drill chucks. It is designed for use with selected Makita drill chuck models, including 192541-1, 192550-0, 194041-7, 196008-1, 763105-4, 763114-3 and 766016-2. Before ordering, you should check that your drill chuck model matches one of the listed part numbers.
Makita 763432-9 S13 13mm Chuck Key
£3.34 Exc. VATThe Makita 763432-9 is an S13 chuck key with a 13mm specification. It is used for operating compatible drill chucks. Before ordering, check the listed drill chuck references 192877-8, 193519-7, 763047-2 and 763062-6 to make sure it matches your chuck.
Makita 763618-5 8mm Collet Cone
£3.26 Exc. VATThe Makita 763618-5 is an 8mm collet cone. It is listed for use with the Makita 3620. Before ordering, check that you need an 8mm collet cone and that your tool model is 3620.
Makita 763620-8 6mm Collet Cone
£18.22 Exc. VATThe Makita 763620-8 is a 6mm collet cone. It is designed for use with the listed Makita models 906, GD0600, GD0601 and GD0603. Before ordering, you should check the 6mm size and your tool model to make sure it matches your setup.
Makita 763622-4 1/2in Collet Cone
£23.34 Exc. VATThe Makita 763622-4 is a 1/2 inch collet cone. It is intended for use with the 3612BR and M3600. Before ordering, check that your tool model matches these listed models and that you need the 1/2 inch size.
Makita 763628-2 12mm Collet Cone
£23.34 Exc. VATThe Makita 763628-2 is a 12mm collet cone. It is intended for use with the listed Makita router models. Before ordering, check that your router model matches the stated fitment.
Makita 763636-3 6mm Collet Cone
£10.34 Exc. VATThe Makita 763636-3 is a 6mm collet cone. It is designed for use with the DRT50, M3601 and RP0900. Before ordering, check that your tool model matches these listed models and that you need the 6mm size.
Makita 763637-1 1/4″ Collet Cone
£7.86 Exc. VATThe Makita 763637-1 is a 1/4″ collet cone for selected Makita routers. It is listed to fit models 3608B, 3620, DRT50, M3601, RP0900, RT0700C and RT001G. Before ordering, check your tool model and confirm that you need a 1/4″ collet cone.
Makita 766027-7 13mm Keyless Chuck
£15.34 Exc. VATThe Makita 766027-7 is a 13mm keyless chuck. It is intended for use with the DHP482. Before ordering, check that you need a 13mm keyless chuck for this model.
Makita 782423-1 Pin Spanner 115-125mm
£1.64 Exc. VATThe Makita 782423-1 is a pin spanner sized for 115-125mm applications. It is a hand tool accessory designed for adjustment or fastening tasks where a pin spanner of this size is required. Before ordering, check that the 115-125mm size matches your equipment or accessory.
Makita 784803-7 1/4in x 65mm Bit Holder
£15.52 Exc. VATThe Makita 784803-7 is a 1/4″ bit holder with a 65mm length and a 1/4″ ZK Form E connection. It is a non-magnetic holder designed for screwdriver bit use. Before ordering, you should check the 1/4″ fitting, the 65mm length, and the noted use with the FS2500 in combination with 197027-0.
Makita 792148-9 165mm 9TPI Wood Blades – Pack of 5
£10.62 Exc. VATThe Makita 792148-9 is a pack of 5 blades for wood cutting applications. Each blade has a total length of 165mm, a tooth spacing of 2.8mm and a tooth pitch of 9TPI. These blades are stated for softwood, soft plastic and wood fibreboards, so you can check the blade length and cutting application before ordering.
Makita 792292-2 Die
£19.69 Exc. VATThe Makita 792292-2 is a die accessory. It is for use with the JN1600, JN1601, JN3200 and JN3201. This gives you clear model fitment for the stated Makita tools.
Makita 792533-6 Side Blade Set
£39.07 Exc. VATThe Makita 792533-6 is a side blade set. It is designed to fit JS160, JS161, JS1660 and JS1661 models. Before ordering, you should check your tool model number matches one of these listed fits.
Makita 792534-4 Centre Blade
£49.00 Exc. VATThe Makita 792534-4 is a centre blade accessory. It is designed to fit JS160, JS161, JS1660 and JS1661 models. Before ordering, you should check your tool model matches this fitment information.
Makita 792556-4 1140mm x 13mm 18TPI Bandsaw Blade
£20.00 Exc. VATThe Makita 792556-4 is a bandsaw blade with a blade length of 1140mm, a width of 13mm and 18 teeth per inch. It is suitable for cutting stainless steel and steel, with a blade thickness of 0.5mm. This blade fits Makita models 2106, 2107F, BPB180, DPB180 and PB002.
Makita 792557-2 1140mm x 13mm 14TPI Bandsaw Blade
£20.67 Exc. VATThe Makita 792557-2 is a bandsaw blade measuring 1140mm x 13mm with 14 teeth per inch. It is intended for cutting stainless steel and steel, and is designed to fit Makita 2106, 2107F, BPB180, DPB180 and PB002 models. Before ordering, check the blade length, width and listed model fitment to make sure it matches your machine.
Makita 792558-0 1140mm x 13mm 24TPI Bandsaw Blade – Pack of 3
£40.84 Exc. VATThe Makita 792558-0 is a pack of 3 bandsaw blades measuring 1140mm x 13mm with 24 teeth per inch. These blades are for bandsaw cutting applications on aluminium, mild steel and non-ferrous metals. Before ordering, check the blade size and fitment details for models 2106, 2107F, BPB180, DPB180 and PB002.