Shop
Bosch T150RD 83mm Diamond Jigsaw Blade – Pack of 3
£21.25 Exc. VATThe Bosch T150RD is an 83mm jigsaw blade designed for cutting soft ceramic tiles. It features a diamond cutting edge with grit 50 tooth spacing information and is supplied as a pack of 3. Before ordering, check that the blade type and 83mm total length match your application.
DeWalt DTM3023-QZ 115mm x 115mm 120 Grit Mesh Sanding Sheets – Pack of 5
£6.13 Exc. VATThe DeWalt DTM3023-QZ is a pack of 5 mesh sanding sheets sized at 115mm x 115mm with a 120 grit grade. These sanding sheets are designed for sanding tasks where this sheet size and grit are required. Before ordering, check that your tool or sanding pad uses 115mm x 115mm sheets and that 120 grit is suitable for your application.
Makita P-37677 150mm 80 Grit Sanding Discs – Pack of 10
£5.00 Exc. VATThe Makita P-37677 sanding discs are 150mm white sanding discs with an 80 grit rating. Made with a paper abrasive backing and aluminium oxide grain, they are suitable for sanding wood, metal, paint and varnish. This pack contains 10 discs, so you can check the 150mm size and 80 grit grade match your sanding setup before ordering.
DeWalt DNPT28R50Z 2.8 x 50mm Bright Ring – Pack of 2200
£36.75 Exc. VATThe DeWalt DNPT28R50Z is a 2.8 x 50mm bright ring accessory supplied in a box quantity of 2200. It has a 33 degree angle and fits DCN692, DPN9033 and DCN930. The bright ring finish is also specified for this model.
Makita D-61020 80mm x 250mm SDS Plus Scaling Chisel
£13.00 Exc. VATThe Makita D-61020 is an SDS Plus scaling chisel with an 80mm width and 250mm length. It is designed for chiselling and scaling tasks using an SDS Plus fitting. Before ordering, check that your tool accepts SDS Plus accessories and that the 80mm x 250mm size is suitable for your application.
DeWalt DT3108-QZ 125mm 320 Grit Sanding Discs – Pack of 10
£7.86 Exc. VATThe DeWalt DT3108-QZ is a pack of 10 sanding discs with a 125mm size and 320 grit grade. These paper-backed discs use aluminium oxide grain and are intended for sanding wood, paint and varnish. Before ordering, check that your sander takes 125mm discs and that 320 grit is suitable for the finish you need.
Bosch T121AFC 92mm Metal Jigsaw Blades – Pack of 25
£33.75 Exc. VATThe Bosch T121AFC is a pack of 25 jigsaw blades for metal cutting tasks. Each blade has a total length of 92mm, 1.2mm tooth spacing and a BIM construction. Before ordering, check that the T121AFC blade type and 92mm length match your required application for steel sheets.
Bosch 2.608.707.346 6mm x 80mm Ceramic Tile Drill Bit
£4.29 Exc. VATThis Bosch ceramic tile drill bit is a 6mm drill bit for drilling into ceramic tile. It has a 6mm diameter and a total length of 80mm. Before ordering, check that the bit size and overall length match your drilling requirements.
Bosch 2.608.707.348 CYL-9 Soft Ceramic Drill
£4.38 Exc. VATThe Bosch 2.608.707.348 is a CYL-9 soft ceramic drill for drilling glass and ceramic tiles. It has a 6mm diameter and a total length of 80mm. This gives you the stated size details for the drill along with its intended application.
Makita DX14 HEPA Dust Extraction Unit
£127.15 Exc. VATThe Makita DX14 is a HEPA dust extraction unit for use with selected Makita tools. It is described as a dust extraction system for the HR002G and HR004G. Before ordering, check that your tool model matches these listed models.
Makita 1916F4-2 Guide Rail Adapter Set
£13.13 Exc. VATThe Makita 1916F4-2 is a guide rail adapter set. It is made for use with the DCS500 and DCS501. This set is intended for guide rail fitting on those specified models.
Dremel 684 Cleaning & Polishing Set – 20pc
£15.72 Exc. VATThe Dremel 684 is a cleaning and polishing set. It includes 20 pieces, giving you a set format rather than a single item. This set is intended for cleaning and polishing tasks.
Bosch S1243HM/TC 300mm Hollow Brick Reciprocating Saw Blade – Pack of 1
£24.69 Exc. VATThe Bosch S1243HM/TC is a 300mm reciprocating saw blade for cutting hollow brick building block. It features 12.7mm tooth spacing with a 2TPI tooth pitch and is supplied as a pack of 1. Before ordering, check the blade length and tooth configuration match your intended cutting application.
Numatic NVM-2BH Dust Bags – Pack of 10
£18.93 Exc. VATThe Numatic NVM-2BH is a pack of 10 dust bags for Numatic vacuum cleaners. It is described as a dust bag for Numatic and is compatible with George, Charles, Henry XL and Henry XL Plus. Before ordering, check that your machine matches one of the listed models or uses container sizes 370, 380, 390 or 470.
Makita F-33263 4.2mm x 75mm Collated Square Drive Screws – Pack of 1000
£40.34 Exc. VATThe Makita F-33263 are collated screws with a 4.2mm x 75mm size and square drive design. They are intended for use with DFR750 and 6844 models, so it is important to check your tool compatibility before ordering. This pack contains 1000 screws and features a yellow zinc coating.
DeWalt DT3030-QZ 115mm x 115mm 40 Grit Quarter Sanding Sheets – Pack of 25
£7.19 Exc. VATThe DeWalt DT3030-QZ is a pack of quarter sanding sheets measuring 115mm x 115mm with a 40 grit grade. These sanding sheets are intended for sanding tasks where this sheet size and grit are required. Before ordering, check that you need quarter sheets in the 115mm x 115mm size and that 40 grit is suitable for your application.
DeWalt DT1670-QZ 184mm x 30mm x 60T Mitre Saw Blade
£25.72 Exc. VATThe DeWalt DT1670-QZ is a mitre saw blade with a 184mm blade diameter, 30mm bore size and 60 teeth. It is intended for mitre saw cutting tasks and includes a tooth thickness of 1.65mm, tooth angle of 7 and blade thickness of 1mm. Before ordering, you should check the blade diameter and bore size match your saw requirements.
Makita B-32275 235mm x 30mm 24T Wood Circular Saw Blade
£26.13 Exc. VATThe Makita B-32275 is a MAKFORCE wood circular saw blade with a 235mm blade diameter, 30mm bore size and 24 teeth. It is intended for wood cutting tasks and features a 2.3mm tooth thickness with a 1.6mm blade thickness. Before ordering, you should check that your saw accepts a 235mm blade with a 30mm bore.
Bosch 2.608.594.435 Power Change Holesaw Set – 9pc
£69.07 Exc. VATThe Bosch 2.608.594.435 is a 9-piece power change holesaw set for hole-cutting tasks. It includes hole saw diameters of 20mm, 25mm, 32mm, 38mm, 51mm and 64mm, with a working length of 44mm. This set is for softwood, plastics, non-ferrous metals, profiles and pipe, so you should check the required diameter range and working length before ordering.
Makita D-51297 22-76mm Diamond Core Set – 9pc
£55.94 Exc. VATThe Makita D-51297 is a 9-piece diamond core set with diameters from 22mm to 76mm. It has an 11mm shank diameter and a max cutting capacity of 60.3mm. This set is for use on wood, soft tile, limestone, plastic and fibreglass.
Makita P-36027 93mm x 230mm 150 Grit Sanding Sheets – Pack of 10
£1.88 Exc. VATThe Makita P-36027 is a pack of 10 red sanding sheets measuring 93mm x 230mm with a 150 grit grade. These sanding sheets are for wood and metal sanding tasks. They are listed for use with models 9036, BO3700, BO3710, BO3711, DBO380 and DBO382, so you should check your tool model and sheet size before ordering.
DeWalt DT3024-QZ 115mm x 115mm 180 Grit Quarter Sanding Sheets – Pack of 10
£4.90 Exc. VATThe DeWalt DT3024-QZ is a pack of 10 quarter sanding sheets measuring 115mm x 115mm with a 180 grit grade. These sanding sheets are designed for general sanding tasks where quarter sheet sizing is required. Before ordering, check that the 115mm x 115mm sheet size and 180 grit specification match your tool and sanding application.
Bosch 1.618.660.000 400mm 29mm Hex Point
£28.75 Exc. VATThe Bosch 1.618.660.000 is a point chisel with a 29mm hex fitting and a 400mm length. It is designed for chiselling and breaking tasks using compatible demolition hammers. Before ordering, check that your tool matches the stated fitment for GSH 16-28 and GSH27VC.
Makita B-13895 80mm x 300mm SDS Max Scaling Chisel
£22.82 Exc. VATThe Makita B-13895 is an SDS Max scaling chisel measuring 80mm x 300mm. It is designed for chiselling and scaling tasks using an SDS Max fitting. Before ordering, you should check that your tool accepts SDS Max accessories and that the 80mm width and 300mm length match the work you need to carry out.